MP CONCEPTS SMOKED MUSTANG LED SIDE MARKER 2018-2020

Smoked, Blacked out Look

MP Concepts Smoked Rear Side Marker Lights are a simple and effective way to enhance the appearance and safety of your 2018-20 Mustang. The MP Concepts Smoked LED Rear Side Marker set helps 2018 and newer Mustang owners out there blackout and customize an otherwise forgotten about area with something that is going to be a little bit more unique than say a standard vinyl wrap.

Modern Electronics with Super Bright LED Technology

These MP Concept Side Marker Lights replace the weak factory incandescent lights with a strip of super-bright LEDs for increased visibility day or night. These Marker Lights employee high output red LEDs for super bright illumination. MP Concepts ensures that their Lights are tightly sealed to prevent dirt and moisture from harming the state-of-the-art electronics found inside.

Smoked Polycarbonate Lens

the MP Concepts marker lights will also combine a durable smoked polycarbonate lens along with the black ABS plastic housing and of course the LED lights all for right around that

Durable, Injected Molded ABS Plastic Housings

Manufactured with injected molded ABS plastic housings, these MP Concept Rear Side Marker Lights feature smoked polycarbonate lenses for both good looks and protection from stone chips.

Simple, Plug and Play Installation

MP Concepts designed their LED Side Marker Lights to be a direct plug and play upgrade for your Mustang’s original factory lights. There is no cutting, splicing or resistors required. Just pop out the old factory side markers and disconnect the wiring harness. Plug the harness into the back of the new LED Side Markers and snap them in place of the old ones.

Includes Driver and Passenger Rear Side Markers

These MP Concepts Smoked Rear Side Marker Lights are designed to fit all 2018-2020 Mustangs including the EcoBoost, GT , Bullitt, R-Spec and Shelby models. Includes driver and passenger side markers.

MP CONCEPTS SMOKED MUSTANG LED SIDE MARKER 2015-2017

Smoked, Blacked out Look

If you are looking for that smoked or, blacked-out look but you’d also like to add some brightness through a modern LED along with a unique light pattern, then the MP Concepts LED Rear Side Marker Lights might just be worth a look.

Brighter than OEM for Additional Safety

An excellent way to improve both the appearance and safety of your 2015-2017 Mustang is by installing a pair of MP Concepts Smoked Rear Side Marker Lights. These MP Concept LED Side Marker Lights replace the weak factory incandescent lights with a strip of super-bright LEDs for increased visibility day or night.

Modern Electronics with Super Bright LED Technology

Unlike the factory markers that utilize a single goal incandescent bulb, the MP options are going to utilize a high-intensity LED strip that is going to illuminate down the center of the marker itself. These Marker Lights employee high output red LEDs for super bright illumination. MP Concepts ensures that their Lights are tightly sealed to prevent dirt and moisture from harming the state-of-the-art electronics found inside.

Smoked Polycarbonate Lens

these MP Concept Rear Side Marker Lights feature smoked polycarbonate lenses for both good looks and protection from stone chips.

Durable, Injected Molded ABS Plastic Housings

The rear side marker lights are manufactured with injected molded ABS plastic housings. Those high-intensity LEDs are going to be housed in the ABS plastic base here along the backside before being topped off in this very dark-smoked, almost black, polycarbonate lens.

Simple, Plug and Play Installation

MP Concepts designed their LED Side Marker Lights to be a direct plug and play upgrade for your Mustang’s original factory lights. There is no cutting, splicing or resistors required. Just pop out the old factory side markers and disconnect the wiring harness. Plug the harness into the back of the new LED Side Markers and snap them in place of the old ones. Includes Driver and Passenger Rear Side Markers

Fits All 2015-2017 Ford Mustang Models

These MP Concepts Smoked Rear Side Marker Lights are designed to fit all 2015-2017 Mustangs including the V6, EcoBoost, GT and Shelby GT350 models. The MP Concepts Rear LED Side Markers that we have here will appeal to all 2015 through ’17 Mustang owners who want to completely black out the markers themselves while at the same time adding some unique LED lighting in the process.

MP CONCEPTS GT500 STYLE MUSTANG FRONT BUMPER (NO ACC)

Shelby GT500 Inspired Styling.

Give your Mustang the Shelby GT500 inspired look with the MP Concepts GT500 Style Mustang Front Bumper. This Front Bumper from MP Concepts closely resembles the fearsome Shelby GT500 Front Fascia.

Injection Moulded Polypropylene.

MP Concepts GT500 Style Mustang Front Bumper is manufactured from injection moulded OEM quality polypropylene. Polypropylene is renowned for being a strong and durable thermoplastic polymer with high impact resistance. Polypropylene is also light weight. These qualities of polypropylene make it ideal for withstanding the hazards faced by a daily driven vehicle. The included chin spoiler and the grilles are also made from polypropylene and features a slight black stipple texture and a snakeskin pattern.

GT500 Style Mustang Front Bumper is a Complete Kit.

MP Concepts Front Fascia Kit comes complete and includes the Bumper cover, upper grille mesh, lower grille mesh, chin spoiler, Fender liner brackets, Grille Extensions, turn signal bezels and hardware. The kit does not include Headlights, Fog Lights or Turn Signals-these components will be carried over from your Mustang.

Straight Forward Bolt-on Installation.

MP Concepts GT500 Style Mustang Front Bumper is designed to be a direct fit replacement for your original stock bumper. For the installation process, some of the factory hardware will be used. After painting the front bumper, the installation can be completed in about two hours. It is recommended that you test fit the Front Bumper before painting.

**PLEASE NOTE** – As the lower mesh covers the full lower section, this bumper does not allow you to retain active cruise control and forward collision alert sensor functions. Normal Cruise control will still work with the sensor turned off. SKU: MP-GT5001820ACC Bumper with a custom made lower grille will allow retaining of ACC sensor and all factory functions.

Fits all 2018, 2019, 2020 Ford Mustangs.

MP Concepts GT500 Style Mustang Front Bumper can be fitted on the 2018-2020 GT and EcoBoost model Mustangs.

NOTE: Mustang GT Owners – This product has been made to suit North American Base model Mustangs. As the Australian Mustang GT comes standard with the premium package, the underbelly pan requires minor modification for fitment.

 

MP CONCEPTS GT350 STYLE MUSTANG ALUMINIUM FENDERS – PAIR

Intimidating Shelby GT350 Inspired Styling

MP Concepts Mustang GT350 Style Mustang Aluminium Fenders with Functional Heat Extractors add Shelby inspired styling to your Mustang to make it stand out from the crowd with an excellent upgrade of visual appeal. It is ideal for your 2018-2020 Mustang GT or Ecoboost making it inexplicably alluring.

Ships Unpainted

MP Concepts GT350 Style Fenders come unpainted and they can be paint matched as you desire. It will be easier for you if you test fit these products before they are painted, as these will need some prep work and priming prior to being painted. Please check with your local panel/paint shop for pricing estimates.

Light Weight Aluminium Construction

The MP Concepts Fenders are molded out of high strength, lightweight Aluminum which is known for its superior durability. These Fenders are given a black e-coat finish to provide protection from corrosion during shipping.

Functional Heat Extractor Vents

The MP Concepts GT350 Style Replacement Aluminium Fenders come with large heat extractor vents. These increase airflow into the engine compartment maximizing the engine cooling capabilities allowing the heated air to easily exit from the engine compartment boasting an improved performance.

OEM Fit and Finish

These MP Concepts Fenders are a direct fit replacement for your original stock fenders; designed using the original OEM CAD data from Ford. Installation is simple and straight forward. You can plan on spending two to three hours on installation and professional help is recommended.

Fits all 2018, 2019, 2020 Mustang GT and Ecoboost Models

MP Concepts GT350 Style Front Replacement Fenders work for your 2018-2020 Ecoboost and GT Mustangs. Please note that they do not fit Shelby GT350 models.

2018-20 MP CONCEPTS MUSTANG HOOD SCOOP

Aggressive Styling.

MP Concepts Hood Scoop is a simple and effective way to add bold, aggressive styling to the exterior of your 2018-2020 Mustang. This MP Concepts Mustang Hood Scoop sits in the center of the factory hood and features a pointed design similar to that of the early Mach 1 hood scoop.

Superior Quality ABS Construction. 

This Mustang Hood Scoop is constructed using injection molded automotive grade acrylonitrile butadiene styrene (ABS). Original OEM CAD data from Ford is used for the designing of this Hood Scoop and it ensures that the components fit perfectly. ABS is renowned for being a strong and durable polymer with high impact resistance. ABS is also lightweight. These qualities of ABS make it ideal for withstanding the hazards faced by a daily driven vehicle.

Simple and Straight Forward Installation. 

For the installation process, the hardware, drilling template, and 3M double-sided automotive bonding tape are provided. This ensures simple and straightforward installation. You do not need to bother with fibreglass for this installation.

Application. 

The MP Concepts Mustang Hood Scoop can be fitted on the 2018-2020 convertible and fastback GT, Ecoboost, BULLITT, and R-SPEC Mustangs. Please note that this Hood Scoop does not fit GT350 Models.

Technical Notes. 

This Hood Scoop is shipped unpainted. It is recommended that you test fit the product before it is painted. Also, professional installation is recommended.

2018-20 MP CONCEPTS GT350 STYLE MUSTANG ALUMINIUM HOOD/BONNET

GT350 Inspired Styling

The MP Concepts GT350 Style Mustang Aluminium Hood closely resembles the aggressive lines of the Shelby GT350. Give your 2018-2020 EcoBoost or GT Mustang the fearsome look of the GT350 with this upgrade.

Mesh Grilles Included

The mesh grilles are included in the hood to allow better airflow into the engine compartment.

Functional Heat Extractor

The MP Concepts GT350 Style Mustang Aluminium Hood comes with a large center heat extractor vent. This improves the airflow into the engine compartment. This center vent comes with a mesh grille that keeps the temperature under the hood in check by allowing the heated air to easily exit from the engine compartment. This gives your Mustang a functional advantage while also giving a bold new look.

Lightweight Aluminium Construction

The MP Concepts GT350 Style Mustang Aluminium Hood is designed using the original OEM CAD data from Ford. The Aluminium used for the construction gives the hood better strength and higher durability while keeping it lightweight. The hood is given a black e-coat finish to provide protection from rust and corrosion during shipping.

Direct Fit, Bolt-on Replacement

The MP Concepts GT350 Style Mustang Aluminium Hood is a direct fit replacement for your factory hood as it utilizes the OEM latches and hinges on your Mustang.

Ships Unpainted

As this hood is shipped unpainted, it will require prep, primer and paint prior to installation which can be completed from your local shop. Please check with your local shop for pricing estimates. It is recommended that you test fit the product before it is painted.

Fits 2018-2020 EcoBoost and GT Mustangs, Excludes GT350 Models

The MP Concepts GT350 Style Mustang Aluminium Hood can be fitted on the 2018-2020 convertible and fastback GT, Ecoboost, BULLITT, and R-SPEC Mustangs. Please note that this hood does not fit GT350 Models.

MP CONCEPTS MUSTANG START BUTTON COVER

SuperCar Inspired Styling

MP Concepts Mustang Start Button Cover adds supercar inspired styling to your already aggressive S550 Mustang boasting supercar style with high tech gauges, switches, and knobs. This Modern Muscle Design Start Button cover can make your interior pop giving you a Fast and Furious feel.

Bright Red Plastic Construction

This simple flip-up cover having a very glossy red finish is manufactured from an automotive grade ABS plastic with superior durability, something that is used on a lot of OEM parts as well as some high-quality aftermarket parts.

Simple Peel-N-Stick Installation

Installation should take you about ten to fifteen minutes as this is a relatively easy installation process. Back of the Mustangs Start Button Cover has pre-applied very thin 3M automotive bonding tape making this one a very simple install. Before installation, you have to make sure the start button is as clean as possible. You can thoroughly clean the surface around the start button with an alcohol prep pad. Then peel the 3M tape and place the cover over the top of the start button.

This Mustangs Start Button Cover Fits all 2015-2020 Mustangs

This MP Concepts Mustang Start Button Cover is compatible with all 2015 to 2020 RHD Ford Mustangs including the EcoBoost, GT, and Shelby models.

MP CONCEPTS MUSTANG REAR WINDOW LOUVERS – MATTE BLACK

Bold Modern Styling

This is going to be a great option for you if you’re looking for a modern take on some classic ’60s Mustang styling, all at a budget-friendly price tag. MP Concepts Mustang Rear Window Louvers; Matte Black is designed with the third brake light in mind featuring an angled design that continues down the entire louver which gives a unique look to the Mustang. If you’re willing to go for a striking modern touch to style your 2015-2020 Fastback Mustang, MP Concepts Mustang Rear Window Louver in Matte Black is the go-to option not just because of the looks but also because of how simple and effective it is.

Injected Molded ABS Construction

Acrylonitrile Butadiene Styrene (ABS) is an extremely strong material known for its light-weight, superior durability, and impact resistance. The MP Concepts Mustang Rear Window Louver is manufactured from the injection of molded automotive-grade ABS plastic which ensures a perfect lift and also makes it extraordinary by the ability to withstand the hazards of daily driven vehicles.

Durable Matte Black Finish

This one is finished in matte black which is going to be a perfect match for any blackout build in general. This enhances the value of the MP Concepts Mustang Rear Window Louver by giving it a great appearance.

Lift-Off One-Piece Design

The lift-off design which can easily be removed for routine cleaning of your back window is so convenient and is a winning aspect of this MP Concepts Mustang Rear Window Louver other than the bold modern look it gives.

Simple Straight Forward Installation

No drilling is required in the installation of the MP Concepts Mustang Rear Window Louver which is installed using mounting brackets that secure to the exterior rear window glass with 3M automotive bonding tape. You should wait at least 24 hours for the brackets to fully cure before driving although it takes only about an hour with most of that time spent on cleaning up the rear window area. For the installation, basic hand tools like an 8-millimeter socket, a ratchet, and alcohol pads, and adhesion promoter will come included in the kit. 

This Mustang Rear Window Louver Fits 2015-2020 Fastback Ford Mustang Models

This Matte Black MP Concepts Mustang Rear Window Louver is designed to fit the 2015-2020 Fastback Mustang models including the V6, EcoBoost, GT,  and Shelby GT350.

MP CONCEPTS MUSTANG REAR WINDOW LOUVERS – GLOSS BLACK

Bold Modern Styling

This is going to be a great option for you if you’re looking for a modern take on some classic ’60s Mustang styling, all at a budget-friendly price tag. MP Concepts Mustang Rear Window Louvers; Gloss Black is designed with the third brake light in mind featuring an angled design that continues down the entire louver which gives away a unique look to the vehicle. If you’re willing to go for a striking modern touch to style your 2015-2020 Fastback Mustang, a glossy MP Concepts Mustang Rear Window Louver is the go-to option, not just because of the looks but also because of how simple and effective it is.

Injected Molded ABS Construction

Acrylonitrile Butadiene Styrene (ABS) is an extremely strong material known for its light-weight, superior durability, and impact resistance. The MP Concepts Mustang Rear Window Louver is manufactured from the injection of molded automotive-grade ABS plastic which ensures a perfect lift and makes it extraordinary by the ability to withstand the hazards of daily driven vehicles.

Durable Gloss Black Finish

This one is finished in gloss black which is going to be a perfect match for the rear decklid panel and any blackout build in general. This is for the enhancement of the value of the MP Concepts Mustang Rear Window Louver by the long-lasting ability and the great appearance.

Lift-Off One-Piece Design

The lift-off design which can easily be removed for routine cleaning of your back window is so convenient and is a winning aspect of this MP Concepts Mustang Rear Window Louver other than the bold modern look it gives.

Simple Straight Forward Installation

No drilling is required for the installation of the MP Concepts designed Mustang Rear Window Louver as it is installed using mounting brackets that secure to the exterior rear window glass with 3M automotive bonding tape. You should wait at least 24 hours for the brackets to fully cure before driving although it takes only about an hour with most of that time spent on cleaning up the rear window area. For the installation, the basic hand tools like an 8-millimeter socket, a ratchet, alcohol pads, and adhesion promoter will come included in the kit. 

This Mustang Rear Window Louver Fits 2015-2020 Fastback Ford Mustang Models

This Gloss Black MP Concepts Mustang Rear Window Louver is designed to fit the 2015-2020 Fastback Mustang models including the V6, EcoBoost, GT, and Shelby GT350.